VICON
23
Facts
Bale Choppers / Feeders 852 863
Model Shredex
863 Pro
866 Pro
Operation Chute
4-Stage Swivel
4-Stage Swivel
4-Stage Swivel
Swivel chute
Cubic Volume (m³)
2.00
3.00
3.00
6.00
Blowing Distance* (m)
up to 18 Mounted
up to 20
up to 20
up to 20
Chassis
Trailed
Trailed
Trailed
Metering System
Single Drum Single Drum Single Drum Two-Drum
Gearbox Specification Capacity Load Capacity (kg) Unloaden Weight (kg)
2-speed
2-Speed
2-Speed
2-speed
800 1435 1.35 1.80
1500 1950
1500 2000
3000 2460
Max. Round Bale Width (m) Max. Round Bale Diameter (m) Max. Square Bale Size (m) Dimensions Overall Length - Door Closed (m)
1.35 2.10
1.35 2.10
1.35 2.10
1.20x1.20x2.50 1.20x1.20x2.70 1.20x1.20x2.70 1.20x1.20x2.70
2.87 2.60 2.70 2.14
4.00 2.66 3.06 2.00 2.01
4.00 2.66 3.06 2.00 2.01
5.14 2.66 3.06 2.00 2.34
Overall Height (m)
Overall Height - Chute open (m) Overall Width - Machine (m) Overall Width - over Tyres (m)
-
Discharge Chute
Electric
Hydraulic
Hydraulic
Hydraulic
Attachment to Tractor Power Requirement at PTO (kW/HP)
40/55
51/70
51/70
56/75
PTO Input Speed (rpm)
540
540
540
540
Wide angle PTO Safety Protection
-
●
●
●
PTO Friction Clutch & Overrun
40 litres/min @ 180 bar
Tractor Flow Requirement
50 litres/min @ 180 bar
Equipment Bale Retaining Kit Remote Control
O O
O ●
O ●
O ●
Number of Knives on Drum
14 x Standard - 28 extra optional
Wheel Equipment
-
10x15.3x14ply 10x15.3x14ply 11x15.3x14ply
Road light kit
O
O O ● ●
O O ● ●
O O ● ●
Mudguard
- -
Drawbar, Ring Hitch or 2-pt Linkage
Silage Kit
O
● Standard
O Optional
- Not available
* Depending on material and barn-specific conditions
Information provided in this brochure is made for general information purposes only and for worldwide circulation. Inaccuracies, errors or omissions may occur and the information may thus not constitute basis for any legal claim against Kverneland Group. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer. Kverneland Group reserves the right at any time to make changes to the design or specifications shown or described, to add or remove features, without any notice or obligations. Safety devices may have been removed from the machines for illustration purposes only, in order to better present functions of the machines. To avoid risk of injury, safety devices must never be removed. If removal of safety devices is necessary, e.g. for maintenance purposes, please contact proper assistance or supervision of a technical assistant. © Kverneland Group Kerteminde AS
Powered by FlippingBook