PICK-UP
VICON
9
2.3m extra wide pick-up • Five tine bars with 34 tines per bar and close 60mm tine spacing. • Each tine bar is supported by four ball bearings along its length. • Twin easy access cam tracks located at both ends of the pick-up. • Large diameter roller crop press for increased intake speeds. • Innovative inboard driveline design for reduced transport width. • Robust ¾” spec HBC drive chains
2.0m pick-up (EasyFeed intake) • Four tine bars each supported on three ball bearings • Close 60mm tine spacing • Innovative inboard driveline design for reduced transport width • Roller crop press for efficient crop flow • Robust ¾” HBC spec drive chains
Galvanized strippers.
Hydraulic pick-up lift with integrated suspension system for accurate ground following.
Generous flotation tyres with simple height adjustment.
Compact internal drive system The VariBale pick-up features a patented internal drive system. This offers multiple advantages compared to conventional systems: • Overall width is reduced as the drive sprocket is contained within the guide flares, so manoeuvrability is improved and risk of pick- up wheels interferance with side obstacles is reduced. • The twin cam tracks are located on the outside of the pick-up frame, allowing for easy access to both the cam itself and the cam follower bearings. • The large diameter drive sprocket results in reduced wear potential compared to externally separated mounted sprockets. • There is no ‘dead area’ at the outside of the pick-up to potentially restrict crop flow. • The crop centralizing augers are driven on the same principle than pick-up transmission, using the internal drive chains. Pick-up sides are clean of any carters and transmission, avoiding any crop pollution and risk of mechanical damages, while maintenance is reduced to the very minimum.
Powered by FlippingBook